SID and STAR — standard routes

1 contributors Last edited: Anonym Updated: 14. 6. 2026 Revision history

SID and STAR — standard routes

A SID (Standard Instrument Departure) and a STAR (Standard Terminal Arrival Route) are published procedures that connect an airport with the airspace route structure. They allow an organised flow of traffic without individually radar-vectoring every aircraft, and they separate potentially conflicting streams using fixed routes, levels, speeds and fixes.

📷 Image placeholder: a SID or STAR chart / the FMS DEP/ARR page
We will add a real SID/STAR chart.

SID — standard instrument departure

A SID takes you from the end of the runway to the first en-route point. It contains:

  • a sequence of waypoints with exact coordinates,
  • altitude restrictions (e.g. “at or above FL060 at …"),
  • speed restrictions (typically 250 kt below FL100 per ICAO),
  • noise abatement — turns to reduce noise over built-up areas.

STAR — standard terminal arrival route

A STAR takes you from the last en-route point to the IAF (Initial Approach Fix) for the final approach. It contains:

  • a descent profile with altitude restrictions,
  • speed restrictions for sequencing arrivals,
  • transitions — variants depending on the direction of arrival / type of approach.

How to read the name

What the name “VOZ 1 H" is made of VOZ  1  H significant point(VOZICE) revision 1–9procedure edition variantrunway / jet vs prop

The name has three parts: the significant point (where the SID ends / the STAR begins) + the revision number (1–9, the edition of the procedure) + the variant letter (distinguishes the start — typically the runway). When the procedure changes (e.g. new obstacles, a route adjustment), the revision number goes up.

LKPR specifically

Prague Airport (LKPR) has RNAV SIDs for runways 06, 12 and 24. A peculiarity: jet aircraft use SIDs with the letters A, B, E, H, while propeller aircraft use SIDs with the letters D, G, K, M, N, Q. Example: a departure via the VOZICE point as VOZ 1H (jet) or VOZ 1N (prop).

Specific names and routes change with the 28-day AIRAC cycle — always use the current Czech AIP / chart (examples as of 06/2026).

Transition

A transition connects a STAR with a specific approach (and a SID with an en-route point). Example: “… STAR transition to ILS RWY 06". In the FMS you select the STAR + transition + approach type.

Restrictions — how to read them

  • At or above, at or below, at (exactly) — the altitude at a fix.
  • Speed — a speed window (e.g. “250 kt"); 250 kt applies by default below FL100.
  • Expect — an expected value (not a clearance; wait for ATC confirmation).

Why SIDs and STARs exist

At a busy airport it would be chaotic to guide each aircraft separately with “turn left, climb…". That is why standard routes were created: the SID (Standard Instrument Departure) for departures and the STAR (Standard Terminal Arrival Route) for arrivals. They have several advantages: smooth and predictable traffic, safe clearance from terrain and obstacles, separation of departures from arrivals, less frequency congestion (the controller just gives the route name instead of long instructions) and often noise abatement over populated areas. The pilot studies and programmes the route in advance, so they fly according to a clear plan.

From takeoff to landing: SID → en-route → STAR → approach SID (departure) en-route (airways) STAR (arrival) departure airport approach + landing
The SID joins the route network, the STAR leads off it back to the final approach.

Structure of a SID

A SID leads the aircraft from the runway into the route network. It consists of a sequence of points (waypoints) with prescribed courses, altitude and speed restrictions. Typically it begins after takeoff with a climb to a certain point, then a series of turns and climbs up to the point where the SID ends and the airway begins. The aim is to get the aircraft safely and in an orderly way from the airport “onto the route" — which is why SIDs also contain protective climb restrictions for terrain and noise. There are variants for different runways and directions.

Structure of a STAR and the link to the approach

A STAR is the opposite — it leads the aircraft from the route into the airport area up to the point where the approach begins (see approaches). It is also made up of waypoints with altitude and speed restrictions that gradually “step down" and slow the aircraft so it can smoothly join the final approach (ILS, RNAV…). A STAR often ends at the IAF (Initial Approach Fix) or hands the aircraft over to controller vectoring. A well-designed STAR allows a continuous descent (CDA) with lower fuel burn and noise.

Transitions and variants

Both SIDs and STARs often have transitions that connect the basic route with a specific route or runway. For a SID this is usually an “en-route transition" to different departure directions; for a STAR an “approach transition" to different runways/IAFs. Thanks to this, one named route covers more combinations. That is why one airport has a whole family of SIDs/STARs — the choice depends on the active runway, the direction of flight and ATC instructions.

📷 Image placeholder: a SID/STAR chart with waypoints and altitude restrictions

RNAV vs. conventional routes

Older routes relied on ground beacons (VOR/NDB, see VOR). Modern ones are RNAV/RNP (see RNAV/RNP) — defined by waypoint coordinates, which the aircraft flies precisely thanks to GPS and the FMS. RNAV SIDs/STARs allow smoother and shorter routes independent of beacon locations, better noise routing and precise descents. Most of today's SIDs/STARs are therefore RNAV; the pilot has them in the navigation database and simply selects them.

Reading restrictions on the chart

The key is to read the altitude and speed restrictions at waypoints correctly. You will meet these types: “at" (an exact altitude), “at or above" (minimum — line under the number), “at or below" (maximum — line over the number) and “window" (between two values). E.g. FL100 with a line on top means “at or below FL100". Speed is restricted in a similar way (e.g. “250 kt or less"). You must comply with these restrictions — they protect separation, terrain clearance and the smooth flow of traffic. A misread restriction is a common beginner mistake (on VATSIM too).

Relation to the FMS and programming

In an airliner, SIDs and STARs are set up in the FMS/MCDU (see FMS): the pilot selects the airport, runway, SID (and transition) for departure, and the STAR and approach for arrival. The FMS then guides the aircraft itself along the waypoints and monitors the altitude/speed restrictions (via LNAV/VNAV and the autopilot). This saves work and increases accuracy — but the pilot must check that the programmed route matches the chart and the clearance (watch out for a “route discontinuity"). Entering SIDs/STARs correctly is a basic skill in IFR flying (see IFR).

SIDs/STARs in the Czech Republic — LKPR

At Václav Havel Airport Prague (LKPR), RNAV SIDs and STARs are published for the individual runways, with named waypoints and noise restrictions (Prague is densely populated). You will find them in the Czech AIP and in the simulators' navigation databases. For a Czech sim pilot, a great exercise is to take a real Prague SID/STAR, programme it into the FMS and fly it — ideally on VATSIM/IVAO with live ATC, where routes are actually assigned (see Czech airspace).

Practical steps — X-Plane / MSFS / VATSIM

  • In the FMS: Boeing F-PLN → DEP/ARR → runway → SID/STAR → transition; Airbus F-PLN → FROM/TO → SID/STAR.
  • Importing from SimBrief saves time; keep a current AIRAC (Navigraph).
  • Important: when ATC changes the active runway, the SID/STAR changes too — update the FMS!
  • DCS: military aircraft do not use civil SIDs/STARs (navigation by waypoints/steerpoints).

Common mistakes

  • Runway not updated — flying the old SID/STAR after ATC changes the runway.
  • Ignoring restrictions — “at or above/below" is mandatory.
  • Treating “expect" as a clearance — wait for confirmation.
  • Wrong letter (jet vs prop) at LKPR.

FAQ

What does the number in the name mean? The revision (edition) of the procedure; it increases when the route changes.

Why different letters for the same point? They distinguish the variant (typically the runway or the aircraft category).

Do I have to fly the whole SID/STAR? Unless you get a “direct" or radar vectors from ATC, yes.

What is an IAF? Initial Approach Fix — the point where the STAR hands over to the approach.

Related links


Sources (verified 06/2026): ICAO Doc 8168 (PANS-OPS), SKYbrary (SIDs and STARs), Czech AIP / VFR-IFR manual (ŘLP ČR) for LKPR procedures; naming and the LKPR jet/prop convention verified. Specific names change with the AIRAC cycle — always use the current chart.