Contents
NOTAM — notices to pilots
A NOTAM (Notice to Air Missions, formerly Notice to Airmen) is a message about temporary changes and hazards that are important for flight safety. The pilot is required to check the NOTAMs before a flight.
What a NOTAM contains
- Closed runways and taxiways.
- Unserviceable navigation aids (ILS, VOR).
- Temporary airspace restrictions (TRA, TSA), military exercises.
- Construction work, changes to operating hours, laser activity, VIP restrictions.
Format
The standardised ICAO format: the Q-line (qualifier), A (affected aerodrome/FIR), B/C (validity from/to), D (schedule), E (text). Abbreviations are coded (e.g. RWY, U/S = unserviceable).
Czech Republic → Europe → World
| Region | NOTAM source |
|---|---|
| Czech Republic | AIS ŘLP ČR (lis.rlp.cz / aim.rlp.cz) |
| Europe | EAD (European AIS Database) |
| World | national AIS; aggregators (notaminfo.com) |
What a NOTAM is and why it exists
A NOTAM (Notice to Air Missions, formerly “Notice to Airmen") is a short, time-limited notice about the status of airports, facilities, services, procedures or a hazard that is important for operations but is not yet in the permanent AIP. Examples: a closed runway, an unserviceable ILS, temporarily prohibited airspace, a crane near the airport, a military exercise, a beacon outage. In short, a NOTAM tells you “what has just changed". Checking them is a mandatory part of flight preparation — flying without them means not knowing about current risks.
Types: NOTAMN, NOTAMR, NOTAMC
By purpose there are three basic types:
- NOTAMN (New) — a new NOTAM with new information.
- NOTAMR (Replace) — replaces an earlier NOTAM (an update).
- NOTAMC (Cancel) — cancels a previously issued NOTAM.
Each NOTAM has a unique number and series (letter + number + year), so it is possible to track what replaces or cancels what. Thanks to this, the pilot always has the current valid set.
Message structure (Q-line and fields A–G)
A NOTAM has a fixed ICAO format. It begins with the Q-line (qualifier), which briefly encodes what it concerns: the FIR, the Q-code (subject and condition — what and how, e.g. runway closed), the traffic affected, purpose, scope and altitude limits. Then follow the fields:
- A) aerodrome/FIR (ICAO code),
- B) start of validity (date/time UTC),
- C) end of validity (or “PERM"/“EST"),
- D) schedule (if only at certain hours),
- E) the text itself (abbreviated, in capitals),
- F) / G) lower and upper limits (for airspace restrictions).
This structure allows machine processing as well as quick comprehension — once you know where to look for what.
SNOWTAM and ASHTAM
For specific hazards there are special formats: a SNOWTAM reports the runway condition in snow/ice/water (contamination, braking action — important in winter, see de-icing), and an ASHTAM reports volcanic ash (dangerous for engines, see meteorology). They have their own coding tailored to the phenomenon. The pilot thus gets targeted information where detail matters most.
PIB — the pre-flight information bulletin
For a longer flight there are dozens to hundreds of individual NOTAMs. They are therefore compiled into a PIB (Pre-flight Information Bulletin) — a set of NOTAMs relevant to the given route, airports and time. The pilot (or dispatch) requests the PIB at the briefing and goes through it as part of the preparation. Modern systems can filter and sort the PIB so that the essentials are not lost in the flood of information.
Where to find NOTAMs
NOTAMs are issued by national aeronautical information services (AIS) in the uniform ICAO format. In the Czech Republic they are provided by ŘLP (aim.rlp.cz), in Europe they are gathered in the EAD database, and worldwide by national AISs and services such as the FAA. They are available via official briefing portals and planning apps (often linked to the flight plan). For sim pilots on VATSIM/IVAO, real NOTAMs are taken as part of realistic planning.
Criticism and modernisation
The NOTAM system is criticised for information overload: for a single flight, a pilot may receive hundreds of messages written in cryptic capitalised abbreviations, where the key information gets lost among the unimportant (a closed car park vs. a closed runway). That is why modernisation is under way — digital NOTAMs, better filtering and prioritisation, more readable language. That the system is critical was also shown by the FAA NOTAM system outage (2023), which briefly halted flights in the USA. The aim is to keep the information but present it clearly and sorted.
An example of reading a NOTAM
Simplified: a NOTAM with field A) LKPR, fields B) and C) with the validity dates and E) RWY 06/24 CLSD means that at Václav Havel Airport runway 06/24 is closed during that period. The pilot immediately knows they cannot plan to land on or take off from it. Reading NOTAMs is about knowing the abbreviations (CLSD = closed, U/S = unserviceable, WIP = work in progress, OBST = obstacle) and the structure — then it is quick.
Permanent vs. temporary information (AIP vs NOTAM)
Aeronautical information has a hierarchy according to permanence. Permanent data (runways, frequencies, procedures) are in the AIP (Aeronautical Information Publication), updated on the AIRAC cycle (28 days). Longer-lasting temporary changes are handled by an AIP Supplement (SUP), and explanatory and advisory matters by an AIC. And short-term and urgent information goes out precisely by NOTAM. The pilot thus knows: what is “permanent" I look for in the AIP, what has “just" changed in the NOTAMs. Both are part of flight preparation (see aeronautical charts).
The most common abbreviations
NOTAMs are full of standard (ICAO) abbreviations that are worth knowing: RWY (runway), TWY (taxiway), APRON (apron), CLSD (closed), U/S (unserviceable), ACT (active), WIP (work in progress), OBST (obstacle), FREQ (frequency), PSN (position), WEF (with effect from), TIL (until). Once learnt, the abbreviations turn a seemingly unreadable text into quick information. The list of abbreviations is in the ICAO documents and the AIP.
Practical steps
Check in the order departure → route → destination → alternate. In the sim on VATSIM/IVAO, follow event/division NOTAMs and TFRs; in MSFS/X-Plane real closures are not reflected automatically — check manually.
Common mistakes
- Skipping the NOTAMs — a closed runway/unserviceable ILS only surprises you on arrival.
- Overlooking the validity — a NOTAM has a from/to window.
FAQ
Do I have to read them all? The relevant ones for your route and airports, yes; aggregators can filter them.
What is a TFR? A temporary flight restriction (VIP, fires, events) — a kind of NOTAM.
Safety and limitations
- A mandatory pre-flight check — part of the preparation together with the weather.
- Currency — NOTAMs change; get a fresh briefing.
Related links
- Aeronautical charts · METAR · VFR navigation
- Glossary — NOTAM, TFR, AIS, FIR
Sources (verified 06/2026): ICAO Annex 15 and Doc 8126 (AIS), AIS ŘLP ČR; EAD (EUROCONTROL). An educational summary; for a real flight, use current official documents.