Aeronautical charts — reading maps

2 contributors Last edited: Anonym Updated: 14. 6. 2026 Revision history

Aeronautical charts — reading maps

Aeronautical maps and charts are the language of navigation. Some serve VFR (orientation by terrain), others IFR (airways, procedures, approaches).

📷 Image placeholder: an approach chart or a VFR map
We will add a real photo / screenshot.

Types of chart

  • VFR charts — typically 1:500,000 (ICAO), terrain and landmarks.
  • IFR en-route — airways, levels, frequencies.
  • SID/STAR charts — departure/arrival procedures.
  • Approach charts — instrument approach procedures (IAP).
  • Airport diagram — runways, taxiways, stands.

Key elements of an approach chart

  • Plan view — the plan with the track and fixes.
  • Profile view — the vertical descent profile.
  • Minima — DA/DH or MDA/MDH, RVR/visibility.
  • Missed approach — the procedure after a go-around.

Czech Republic → Europe → World

Czech Republic/Europe: the state AIP (in the Czech Republic, from ŘLP) and the VFR manual; worldwide: the commercial Jeppesen (the global standard) and national AIPs. In the sim, current charts are available via Navigraph.

Why special aeronautical charts

A pilot does not need an ordinary map but an aeronautical chart adapted for navigation in the air. It shows what matters in flight: airspace and its classes, navigation beacons and frequencies, routes and fixes, terrain and obstacles with their elevations, airports and procedures. The standards are set by ICAO (Annex 4), so the charts can be read internationally. Without them you can neither plan nor fly safely — they are to a pilot what a road map is to a driver, only far richer in information.

VFR charts (ICAO 1:500,000)

For visual flights there is the VFR chart, classically at a scale of 1:500,000 (and a more detailed 1:250,000). It shows terrain (in colour and with contour lines — the pilot sees hills and valleys), landmarks (rivers, towns, roads, railways), airspace (CTR/TMA/prohibited areas), obstacles (masts, chimneys with their height) and airfields. The VFR pilot navigates by it by looking outside — comparing the chart with the landscape (pilotage). In the Czech Republic the VFR chart and manual are published by ŘLP (see VFR navigation).

IFR en-route charts

For instrument flights there are en-route charts, which do not show terrain as a picture but concentrate on airways, beacons, fixes and altitudes. They are divided into low (lower levels) and high (higher levels). On them you will find airways with their designators, the distances between fixes, beacon frequencies and above all the minimum altitudes (MEA — minimum en-route altitude, MOCA, MORA), which guarantee safe terrain clearance and signal reception. They are more “abstract", but exactly what is needed for IFR (see IFR).

Symbols, colours and altitudes

Charts speak in standardised symbols: compass roses at VORs, NDB and airport symbols, airspace boundaries and colours, frequency numbers, spot heights (terrain elevations) and obstacles with their elevation. The altitude data are important — e.g. the MSA (minimum sector altitude around an airport) on approach charts. Learning to “read" the symbols is like learning the alphabet — then the chart “speaks" and the pilot can quickly extract everything essential from it. A legend of symbols is part of every set of charts.

Scale and projection

Aeronautical charts most often use the Lambert conformal conic projection, on which a straight line approximately corresponds to the shortest route (great circle) and angles (headings) remain true — ideal for navigation. The scale (e.g. 1:500,000) determines the level of detail: a smaller scale = a greater overview, less detail. The pilot uses the scale to measure distances (with a ruler/plotter) and courses (with a protractor) — even in the GPS age this is a basic skill and a backup.

Electronic charts and the EFB

Paper charts have largely been replaced by the EFB (Electronic Flight Bag) — a tablet or cockpit display with digital charts. Jeppesen (professional charts) dominates, and in the sim and in GA Navigraph and ForeFlight. Advantages: the chart updates itself, shows the aircraft's position (moving map), weather, NOTAMs and the flight plan all in one. The pilot thus has everything at hand and clearly laid out. Even so, it is good to be able to read a paper chart in case of a failure.

AIRAC — why charts “expire"

Aeronautical information changes, which is why charts have an effective date and are updated on a fixed AIRAC cycle (every 28 days). Using an outdated chart is dangerous — a route, frequency, minimum or airspace may have changed. In an EFB the data are updated by subscription; with paper charts the sheets are replaced. The rule: before a flight, always check that the charts (and the navigation database) are in the current cycle (see NOTAM for short-term changes).

How to read a chart in practice

When preparing a flight, the pilot finds the route on the chart, measures the courses and distances, checks the airspace (where clearance is needed), the minimum altitudes and the landmarks, and notes the frequencies and alternates. In flight they then continuously compare the chart with reality (VFR), or follow their position on the en-route chart/EFB (IFR). Chart reading is an active skill — the more you work with charts, the faster you “see" the whole flight in them.

Airport diagram and taxiing

A special type is the airport diagram (airport/taxi chart) — a chart of the airport itself with its runways, taxiways, stands and markings. It is used for orientation on the ground: the pilot uses it to taxi from the gate to the runway and back according to ATC instructions. At large and complex airports it is a key prevention of runway incursions — entering an active runway by mistake. The diagram also highlights hotspots (places with a higher risk of confusion). For a sim pilot at a large airport, the airport diagram is essential to avoid getting lost among the taxiways.

Charts in DCS and military maps

Even in a military simulator you cannot do without maps. DCS has the F10 map (an overview of the battlefield) and a kneeboard with information on airfields, frequencies (TACAN/ILS), navigation points and the mission briefing. Military maps also contain tactical elements (areas, targets, threats) and use coordinate systems (e.g. bullseye, MGRS — see NATO brevity). The principle, though, is the same as in civil flying: know where I am, where I am flying and what is around me. Chart reading is a universal skill across civil and military flying.

Practical steps — X-Plane / DCS

For VFR use Little Navmap + the VFR manual; for IFR, Navigraph Charts. In DCS there are “kneeboard" maps and the mission's navigation points; real AIP charts are used less (a simplified environment).

Common mistakes

  • Outdated data — charts change with AIRAC; use current ones.
  • Mixing up minima — read the correct line (approach type, aircraft category).

FAQ

Jeppesen vs. AIP? The same content, different graphics; Jeppesen is uniform worldwide, the AIP is the state's own.

What is the MSA? The minimum safe altitude around an airport (on the chart).

Safety and limitations

  • Currency (AIRAC) — an outdated chart is dangerous.
  • Briefing — go through the chart before the approach (frequency, course, minima, MAP).

Related links


Sources (verified 06/2026): ICAO Annex 4 (aeronautical charts), Czech AIP / VFR manual (ŘLP); Jeppesen, Navigraph. An educational summary; for a real flight, use current official documents.