Meteorology for pilots — the basics

2 contributors Last edited: Anonym Updated: 14. 6. 2026 Revision history

Meteorology for pilots

Weather is the environment in which an aircraft moves — and it often decides whether and how a flight will go. Meteorology teaches the pilot to read the atmosphere: to understand pressure and altitude, wind, cloud, fronts and hazardous phenomena such as thunderstorms, icing or wind shear. It is not academic theory — misjudged weather is one of the main causes of air accidents. This overview links the basics together and refers to detailed articles on the individual phenomena; for the sim pilot it is a guide to understanding the “real weather" in the simulator and METAR/TAF reports.

The atmosphere and the ISA Stratosphere (above ~11 km) Tropopause ~11 km / FL360 Troposphere (weather) temperature falls ~2 °C / 1,000 ft ISA: +15 °C, 1013 hPa (sea level) Almost all weather takes place in the troposphere; above it is the calm stratosphere.
The standard atmosphere (ISA): +15 °C and 1013 hPa at sea level, with the temperature falling by about 2 °C per 1,000 ft up to the tropopause (~11 km).

The atmosphere and the standard atmosphere (ISA)

Almost all weather takes place in the lowest layer — the troposphere — which extends to roughly 11 km (FL360), where it ends at the tropopause; above it is the calm stratosphere. So that instruments and performance can be compared, the International Standard Atmosphere (ISA) was introduced: +15 °C and a pressure of 1013.25 hPa at sea level, with the temperature falling by about 2 °C per 1,000 ft (6.5 °C/km). The real atmosphere differs from the ISA, and these deviations (warmer/colder, higher/lower pressure) affect the aircraft's performance and the altimeter reading.

Pressure and the altimeter

The altimeter is really a barometer — it measures altitude by pressure, which is why it must be set correctly:

  • QNH — the setting at which the altimeter shows altitude above sea level (on the ground, the airport elevation).
  • QFE — shows height above a specific airport (zero on the ground).
  • QNE / STD (1013 hPa) — the standard setting for flight levels above the transition altitude (see Flight levels).

The warning “from high to low, look out below" applies: if you fly into an area of lower pressure (or lower temperature) without resetting, your actual altitude is lower than the altimeter shows — a risk in the mountains.

Pressure systems

On a weather chart you will find high pressure (anticyclones) and low pressure (cyclones):

  • High (H) — sinking air, usually stable and fine weather; in winter, however, also inversions and fog.
  • Low (L) — rising air, cloud, precipitation, fronts and wind.
  • Ridge and trough — elongated areas of higher/lower pressure.

Air flows from high to low, but because of the Earth's rotation it is deflected (see wind below). In the northern hemisphere air circulates anticlockwise around a low and clockwise around a high.

Cold vs. warm front cold front steep → thunderstorms (CB) warm front gentle → steady rain (NS) A cold front is steep and fast (showers/thunderstorms); a warm front gentle and gradual (steady precipitation).
A cold front forces warm air sharply upwards (thunderstorms, showers); a warm front rises gradually (layered cloud, steady rain).

Weather fronts

A front is the boundary between two air masses of different temperature and humidity — and the main “producer" of weather:

  • Cold front — cold air pushes under warm air and forces it sharply upwards; steep, fast, it brings showers and thunderstorms (CB), and after it passes the sky clears and it gets cooler.
  • Warm front — warm air rises gradually over cold air; gentle, slow, it gives extensive layered cloud and steady rain, and warming.
  • Occluded front — the cold front catches up with the warm one and “folds" them together; mixed weather.
  • Stationary front — a front that barely moves; long-lasting weather.

Knowing the type of front tells you what to expect — a short, abrupt change (cold) or a long deterioration (warm).

Wind

Wind is created by a pressure difference (the pressure gradient), but because of the Earth's rotation it is deflected by the Coriolis force — which is why aloft it blows roughly along the isobars (the geostrophic wind). Near the ground it is slowed and deflected by friction, so it blows obliquely across the isobars towards the low. Pilots are also interested in local winds:

  • Breezes (sea/land) — a daily circulation near the coast.
  • Valley and mountain winds — daytime/night-time flows along slopes.
  • Föhn — a warm, dry wind in the lee of mountains.
  • Wind shear — a sudden change in direction/speed; dangerous mainly during takeoff and landing (see thunderstorms — microburst).

Humidity and cloud

Air contains water vapour; if it cools to its dew point, the vapour condenses and cloud or fog forms. Clouds are classified by height and shape:

  • Low (stratus St, stratocumulus, nimbostratus Ns — rain).
  • Middle (altocumulus, altostratus).
  • High (cirrus Ci, ice crystals).
  • Vertical — cumuliform: cumulus (Cu), towering TCU and the thunderstorm cumulonimbus (CB) — the most dangerous cloud.

The shape of a cloud reveals the state of the atmosphere: layered = stable/calm, cumuliform = unstable/convective.

Visibility and fog

Visibility is essential for VFR and for approaches. Fog forms in several ways: radiation fog (heat radiated away on a clear night, typically in valleys and basins), advection fog (warm moist air over a cold surface), evaporation fog or orographic fog (on slopes). Haze, smoke, rain and snow also reduce visibility. Fog is a frequent cause of delays and diversions (see the minima in airspace and ILS).

Atmospheric stability

Whether air “resists" rising or encourages it is determined by stability. In a stable atmosphere, air that is lifted sinks back — layered cloud, fog and smooth flight result. In an unstable atmosphere, air that is lifted keeps rising — convection, cumuliform clouds, showers, thunderstorms and turbulence result. A special case is the inversion (temperature increases with height), which “puts a lid" on the atmosphere and keeps fog, smog and poor visibility near the ground.

Hazardous phenomena — signpost

The most dangerous phenomena have their own detailed articles:

  • Thunderstorms and convection — CB, microbursts, hail, wind shear (see Thunderstorms).
  • Icing — ice on the airframe and in the engine (see Icing).
  • Jet stream and CAT — the jet stream and clear-air turbulence (see Jet stream).
  • Fog and low cloud — visibility below minima.
  • Turbulence — thermal, mechanical, wake (see Wake turbulence).

Global circulation

Weather also has a big framework: the uneven heating of the Earth (equator vs poles) drives circulation cells (Hadley, Ferrel, polar) and thus wind belts — the trade winds, the prevailing westerlies of the mid-latitudes and the jet streams at their boundaries. This circulation is also why our weather mostly comes from the west and how pressure systems move.

📷 Image placeholder: a weather chart (fronts, isobars) or real weather in the sim
We will add a real photo / screenshot.

METAR and TAF

Pilots get their weather mainly from two reports: the METAR (the current observation at an airport) and the TAF (the forecast for an airport). They are supplemented by SIGMET/AIRMET warnings (hazardous phenomena), the ATIS (broadcast airport information) and VOLMET (weather for several airports). Reading METARs/TAFs is a basic skill — in detail see METAR and TAF.

Czech Republic → Europe → World

In the Czech Republic, aeronautical meteorology is provided by ČHMÚ (and the military service), and the data are in the AIM/AIP and on weather portals. In Europe and worldwide, aviation forecasts and reports are harmonised by ICAO Annex 3 / WMO, so METARs/TAFs, SIGMETs and units are understood internationally. Global models (e.g. from the ECMWF) forecast the weather days ahead. The rule: before a flight, always check the current METAR/TAF, SIGMETs and the outlook for the route and the alternate.

In practice — simulators

  • Turn on real weather (MSFS/X-Plane can download live data) and learn to plan according to it.
  • Practise reading METARs/TAFs and turning them into decisions (will I fly VFR? which approach? alternate?).
  • Fly through a frontal passage — you will see the change in wind, cloud and visibility.
  • Try flying in a thunderstorm, icing or fog safely in the sim, so you understand the risks.
  • Practise wind shear on approach and how to respond to it.

Temperature, dew point and humidity

Two values in a METAR say a lot: the temperature and the dew point. Their difference (the spread) shows how close the air is to saturation: a small difference (1–2 °C) means high humidity and a risk of fog or low cloud, a large difference dry air. When the temperature falls to the dew point (in the evening, towards morning), the vapour condenses — which is why fog forms at night and dissolves after sunrise. The dew point is also a guide to the base of cumuliform cloud: roughly, the larger the spread, the higher the Cu base.

Precipitation and its types

Depending on the temperature and type of cloud, different kinds of precipitation fall: rain (steady from layered cloud, torrential from thunderstorms), drizzle (from low stratus), snow, hail (from towering CBs — a sign of strong convection) and dangerous freezing rain (supercooled droplets freeze on impact — related to icing, see Icing). The type and intensity of precipitation are reported in the METAR and affect visibility, runway braking action and icing.

Turbulence — types

Turbulence is irregular air movement that “tosses" the aircraft about. Pilots are mainly interested in:

  • Thermal — from rising currents of heated air (sunny afternoons, cumuliform clouds).
  • Mechanical — from airflow over terrain and obstacles (the lee of mountains, buildings).
  • Shear — at the boundary of layers with different winds (including CAT near the jet stream, see Jet stream).
  • Wake — vortices behind another aircraft (see Wake turbulence).

Severe turbulence is dangerous mainly around thunderstorms — which is why CBs are avoided by a wide margin.

Aviation weather products and sources

Besides the METAR and TAF there are other products: SIGMETs (warnings of hazardous phenomena for a whole region — thunderstorms, severe icing/turbulence, volcanic ash), AIRMETs (less intense phenomena), area forecasts for low levels, significant weather charts and wind/temperature charts for planning levels. Broadcast products are the ATIS (information for a given airport) and VOLMET (weather for several airports). Everything is based on the uniform ICAO format, so it is understood internationally.

Flight planning according to the weather

Weather preparation is routine for every flight. The pilot goes through the METAR and TAF for the departure, destination and alternate, the SIGMETs/AIRMETs (thunderstorms, icing, turbulence), the forecast en-route wind (which affects time and fuel) and the freezing level (where icing is a risk). From this they decide: will I fly VFR or IFR? which level is best (wind, icing, turbulence)? which approach and which alternate? Good “weather decision-making" is half of a safe flight — and in the sim it can be practised superbly with real weather.

Volcanic ash and special risks

Some phenomena are rare but serious. Volcanic ash can destroy jet engines (it melts inside them and clogs them) — which is why ash clouds are closed to traffic (the famous grounding of Europe in 2010 after the eruption of an Icelandic volcano). Watch out too for sand and dust storms (visibility, wear), smoke from large fires and extreme temperatures, which change the density altitude and the aircraft's performance. These phenomena are reported in SIGMETs and NOTAMs (see NOTAM) and are among the reasons why a route or level sometimes has to be changed.

Safety and limitations

  • Weather is the main risk factor — always get current information and have a plan B.
  • Set the altimeter correctly (QNH/STD); watch out for low pressure/temperature in the mountains.
  • Avoid thunderstorms by a wide margin, never fly into a CB (see Thunderstorms).
  • Icing changes aerodynamics and performance — know the anti-icing systems (see Icing).
  • VFR into IMC is deadly dangerous — don't “push on" into deteriorating weather.

FAQ

What is the ISA? The standard atmosphere: +15 °C and 1013 hPa at sea level, a decrease of ~2 °C/1,000 ft — a reference model.

What is the difference between a cold and a warm front? A cold front is steep and fast (thunderstorms, clearing); a warm front is gentle (steady rain, warming).

Why “from high to low, look out below"? With an altimeter that has not been reset, you are actually lower than it shows — a risk in the mountains.

What is an inversion? Temperature increases with height; it “puts a lid" on the atmosphere and keeps fog and smog near the ground.

What is wind shear? A sudden change in wind direction/speed; dangerous mainly during takeoff and landing.

Where does our weather come from? Mostly from the west (the prevailing westerlies of the mid-latitudes).

What is the temperature/dew point spread? Their difference; a small one (1–2 °C) = high humidity and a risk of fog or low cloud.

Why avoid a thunderstorm by a wide margin? Around a CB there is severe turbulence, hail, wind shear and icing — dangerous even outside the cloud itself.

Where do I get the weather in the sim? From real data (MSFS/X-Plane) and from METARs/TAFs — just as in real life.

Related links


Sources (verified 06/2026): ICAO Annex 3 (Meteorological Service), WMO, ČHMÚ (aeronautical meteorology), meteorology textbooks for pilots (PPL/ATPL Meteorology); the ISA (+15 °C / 1013.25 hPa / ~2 °C per 1,000 ft), the tropopause at ~11 km, types of front, pressure systems, stability/inversions and global circulation (Hadley/Ferrel/polar cells) verified from multiple sources. Always get the current weather from valid METARs/TAFs/SIGMETs.