Contents
Marshalling — signals on the apron
Marshalling is the visual guidance of an aircraft on the ground using hand signals given by a ground worker — the marshaller. The pilot of a tall airliner has a limited view downwards and forwards and, on a busy apron, may not be able to hear or see other guidance; that is why they rely on clear, internationally understood gestures to taxi safely onto the stand, stop and park. Marshalling is a classic part of ground operations — and in simulators you will meet it at gates and on aircraft carriers.
Who the marshaller is and what they use
The marshaller stands on the apron where the pilot can see them well (usually ahead and to the left of the aircraft) and gives signals with both hands. For visibility they wear a high-visibility reflective vest and use signalling wands/bats — orange bats by day, illuminated wands at night. The gestures are slow, clear and unambiguous, so that they cannot be confused. The marshaller must keep track of the surroundings (other aircraft, vehicles, obstacles) and is responsible for guiding the aircraft safely and precisely to the marked spot.
Why the signals are standardised
So that a pilot from any corner of the world understands the marshaller at any airport, the signals are internationally standardised (ICAO, Annex 2). The same gesture means the same thing everywhere — which is essential for safety because, unlike radio communication, language plays no role. The pilot immediately knows what the marshaller wants, whether they have landed in Prague, Tokyo or New York.
Key signals
| Signal (gesture) | Meaning |
|---|---|
| Bent arms, “beckoning" towards oneself | Move ahead |
| One arm points the direction, the other beckons | Turn (left/right) |
| Arms down, “patting" the air | Slow down |
| Arms crossed above the head | Stop (rapidly = emergency stop) |
| Raised arm, clenching the fist | Set brakes |
| Hand “drawn across the throat" | Cut engines |
| Thumbs up | All clear / agreement |
| Hands indicating chocks in / chocks out | Inserting / removing the chocks |
The pilot responds to the signals smoothly and steadily; if they do not understand a signal, they would rather stop. The marshaller, for their part, never gives an instruction that would endanger the aircraft or its surroundings.
Marshalling vs. docking systems (VDGS)
At modern large airports, the marshaller at the gate is often replaced by a visual docking guidance system (VDGS) — an electronic board that shows the pilot the aircraft type, the distance to the stop position and the centreline (e.g. Safedock/AGNIS-type systems). The pilot taxis in according to the display until the “STOP" mark. Marshalling is still used, however, where there is no VDGS (smaller airports, remote stands, exceptional situations) and as a backup when the docking system fails. Both methods lead to the same goal: parking the aircraft precisely and safely.
Pushback and teamwork on the apron
Marshalling is only part of the ground “ballet". On departure, the aircraft is usually pushed back from the gate by a tug — this is directed by ground personnel on a headset in contact with the crew, and a marshaller may give supplementary signals. Many professions meet on the apron: marshallers, tug drivers, refuelling, loading, handling. Everything must be coordinated, because the apron is a busy and dangerous place (moving aircraft, jet blast, vehicles).
Czech Republic → Europe → World
Marshalling signals are uniform worldwide according to ICAO, so the same gestures apply in the Czech Republic (LKPR and others), in Europe and around the world. Only the degree of automation differs: large airports (Prague, Frankfurt) have VDGS at most gates, while smaller airports and flying clubs rely on marshalling and personal guidance. The rules of ground operations and stand markings are in the AIP of the given airport.
In simulators
- MSFS / X-Plane: at gates a marshaller or a docking system appears and guides you onto the stand; follow-me cars are also common. The GSX (Ground Services) add-on models marshalling and pushback very realistically.
- Learn to taxi onto the stand according to the signals/VDGS and stop exactly on the mark — it is part of an “immersive" end to the flight.
- DCS / aircraft carrier: on the carrier deck, the deck crew (the yellow-shirted “plane directors") guide you with similar signals — marshalling at sea, in effect.
The follow-me car
Where taxiing is complicated (a large airport, reduced visibility, an unfamiliar airport), the aircraft is guided by a “follow me" vehicle — the pilot simply follows it from the runway to the stand. The car has distinctive markings and a “FOLLOW ME" light board. At the stand, a marshaller or a docking system often takes over the guidance. Follow-me cars and marshalling thus complement each other: the car brings the aircraft to the gate, and the marshaller/VDGS parks it precisely.
Day, night and reduced visibility
By day the marshaller gives signals with orange bats/paddles, at night and at dusk with illuminated wands, so that the gestures can be seen unambiguously. In reduced visibility (fog), guidance on the apron is more difficult and traffic slows down (related to the LVP procedures, see ILS). The visibility of the marshaller and their signals is therefore key — hence the reflective clothing, a suitable position and illuminated aids at night.
Safety
- The apron is dangerous — jet blast and engine intake suction, moving vehicles; the marshaller and crew must be extremely attentive.
- Clarity — if in doubt about a signal, the pilot stops; better a delay than a collision.
- An emergency stop (rapidly crossed arms) has absolute priority.
- Visibility — the marshaller stands where the pilot can always see them; illuminated wands at night.
FAQ
Why are signals used and not radio? They are language-neutral, immediate and work even without contact — the pilot sees the gesture and responds at once.
What does crossing the arms above the head mean? Stop; rapidly repeated crossing means an emergency stop.
Have machines replaced marshallers? At large gates often yes (VDGS), but marshalling remains as a backup and at smaller airports.
Who guides you on an aircraft carrier? The deck crew (plane directors) with similar signals — you will see it on deck in DCS.
Are the signals the same everywhere? Yes, they are standardised by ICAO and apply internationally.
Related links
- Airport infrastructure · LKPR · Types of approach · Radiotelephony
- MSFS 2024 · DCS World · Glossary — apron, VDGS, pushback, follow-me, deck crew
Sources (verified 06/2026): ICAO Annex 2, Appendix 1 (Signals — marshalling signals), documentation from docking system (VDGS) manufacturers and airport operations manuals; the standardised gestures (move ahead/turn/slow down/stop/set brakes/cut engines) and the marshaller's role verified from multiple sources.