Flight instruments — the classic six-pack

2 contributors Last edited: Anonym Updated: 14. 6. 2026 Revision history

Flight instruments — the classic six-pack

The classic analogue arrangement (the “basic six" / “sacred six") forms the basis of orientation in GA aircraft. Even in the era of glass cockpits, understanding it is essential — for example for partial panel flying (flying with some instruments out of service).

📷 Image placeholder: a panel with the six-pack (basic T) in a Cessna
We will add a real photo / screenshot.

Top row

  • Airspeed indicator (ASI) — coloured arcs: white (flaps), green (normal), yellow (caution), red line (VNE). Pitot-static.
  • Attitude indicator (AI) — pitch and bank; gyroscopic.
  • Altimeter (ALT) — barometric, with a window for the QNH (Kollsman).

Bottom row

  • Turn coordinator (TC) — rate of turn + ball (slip/skid).
  • Directional gyro (DG)/HSI — gyrocompass.
  • Vertical speed indicator (VSI) — vertical speed (ft/min).

Pitot-static and gyros

The ASI, ALT and VSI measure pressure (pitot tube + static port). The AI, DG and TC are gyroscopic. That is why a blocked pitot/static system distorts speed/altitude — and a gyro failure distorts the attitude indicator.

The classic “six-pack" airspeedASI attitudeAI altimeterALT turn coord.TC directionalgyroHI / DG vertical speedVSI Blue = gyroscopic. “Basic T" = ASI–AI–ALT (top) + HI (bottom centre).
The standard arrangement of the six instruments. The attitude indicator and the directional gyro (blue) are gyroscopic; the rest work on air pressure.

The “Basic T" layout

The six instruments have a standard arrangement, so the pilot can find them “blind" in any aircraft. The three most important form the letter T: at the top the airspeed indicator (ASI) — attitude indicator (AI) — altimeter (ALT), and in the middle below the attitude indicator the directional gyro (HI). Below there are also the turn coordinator (TC) and the vertical speed indicator (VSI). This “Basic T" is so ingrained that even the modern glass cockpit preserves it in its layout (see Glass cockpit).

The pitot-static system and its errors

Three instruments (ASI, ALT, VSI) work on air pressure. The pitot tube senses the total (dynamic) pressure of the oncoming air, and the static ports the ambient static pressure. The speed is calculated from their difference, and the altitude from the absolute pressure. That is why blocked sensors are dangerous:

  • A blocked pitot tube (ice, insects) — the airspeed indicator reads wrongly (it behaves like an altimeter: it “increases" in a climb). That is why pitot heat is essential (see Icing).
  • Blocked static ports — the altimeter “freezes", the VSI shows zero and the airspeed indicator is wrong; the solution is the alternate static source.

Pitot-static errors have caused serious accidents — which is why pilots learn to recognise their symptoms.

Gyroscopic instruments

Three instruments (AI, HI, TC) use a gyroscope, which “remembers" its orientation in space. The attitude indicator shows bank and pitch, the directional gyro a stable heading (but it “drifts" — precession — and must be aligned with the magnetic compass), and the turn coordinator the rate and coordination of the turn. The gyros are driven either by vacuum (a vacuum pump on the engine) or by electricity — and what fails in a failure depends on the source.

The instrument scan

In instrument flight (IMC), the pilot does not watch one instrument but systematically moves their eyes between them — the so-called scan. The most common is the selective radial scan: the eyes keep returning to the attitude indicator (the master instrument) and “branch out" from it to the others as needed. The aim is to always have an up-to-date overall picture and not to fixate on one reading (fixation is a common mistake). A good scan is a skill that an IFR pilot practises for a long time (see IFR).

Partial panel — when an instrument fails

The key is to know what fails together. In a vacuum failure, both vacuum-driven gyro instruments stop working (typically the attitude indicator and the directional gyro) — and insidiously, sometimes they “freeze" in a wrong position. The pilot must then fly partial panel: maintain attitude using the turn coordinator, airspeed indicator, altimeter and magnetic compass without the attitude indicator. It is demanding and is practised, because an unmanaged gyro failure in IMC has led to accidents. That is why modern aircraft have independent backups.

Replacement by the glass cockpit and backups

Modern aircraft replace mechanical instruments with electronic displays (glass), where the data are supplied by an ADAHRS (Air Data and Attitude Heading Reference System) — solid-state sensors without spinning gyroscopes. Even so, the logic of the “six-pack" still applies (the Basic T remains), and the aircraft has an independent standby instrument — the integrated ISIS (attitude, speed, altitude) with its own power supply in case the displays fail (see Glass cockpit). The principle does not change, only the technology.

The magnetic compass and its quirks

The backup and independent source of heading is the simple magnetic compass — it works without power but has its errors, which the pilot must know. When accelerating and decelerating (on easterly/westerly headings) it reads temporarily wrong, and likewise during a turn (on northerly headings it “lags", on southerly ones it “leads") because of the inclination of the magnetic field (dip). That is why the directional gyro is used for an accurate heading and is only periodically aligned with the compass in steady straight flight. The compass is nevertheless an essential backup — when everything else fails, you can always read the heading from it.

The six-pack in fighters and helicopters

The same principles apply beyond small aircraft. Fighters (including in DCS) have the same basic information (speed, attitude, altitude, heading), just often on the HUD and supplemented by military instruments (RWR, sight). Helicopters use a similar set plus instruments specific to hovering and rotor performance. Even older military aircraft have classic gauges arranged according to the same logic. Understanding the “six-pack" is thus a universal foundation that you will use across all types and simulators.

Practical steps — X-Plane / DCS

Practise partial panel (fail the AI/DG and fly by the ASI, TC, ALT and VSI). In DCS, combat aircraft have backup analogue instruments next to the HUD/MFDs — learn to switch to them when damaged.

Common mistakes

  • Fixating on one instrument — use a “scan" (cyclic cross-checking).
  • Ignoring the ball — uncoordinated flight increases the risk of a spin.

FAQ

What if the pitot freezes? Wrong airspeed — use pitot heat and fly by attitude/power (pitch+power).

Why the “sacred six"? These instruments are enough for safe instrument flight.

Safety and limitations

  • Backup — even a glass cockpit has standby instruments in case of failure.
  • Scan — regular cross-checking prevents spatial disorientation.

Related links


Sources (verified 06/2026): textbooks (EASA PPL/ATPL — instruments), flight manuals (POH). An educational summary; for a real flight, use current official documents.