Contents
IFR — flying by instruments
IFR (Instrument Flight Rules) is the set of rules under which an aircraft flies by reference to instruments and under the control of air traffic control — even when the pilot cannot see outside because of cloud or darkness. IFR is the “backbone" of all airline transport: it makes it possible to fly reliably and in almost any weather, along precisely defined routes and procedures, with separation provided. The opposite is VFR (visual flight), where the pilot navigates by looking outside and avoids others themselves. Understanding IFR is essential for anyone who wants to fly airliners in the sim as in real life — especially on the online networks.
IFR vs. VFR — when and why
The main difference is what the pilot navigates by and who provides safe separation:
- VFR — the pilot sees outside, navigates visually and avoids others themselves (“see and avoid"); only in VMC (good visibility, see airspace).
- IFR — the pilot flies by instruments, keeps precise routes and altitudes according to the ATC clearance, and ATC provides separation. It can also be flown in IMC (in cloud, fog, at night).
In IMC (when the VMC minima are not met), IFR is the only legal option. Airliners practically always fly IFR regardless of the weather, because it is safer and more predictable.
Requirements: rating and equipment
- Instrument rating (IR) — the pilot must have training and a valid rating for instrument flight (see licences and ratings).
- Aircraft equipment — flight and navigation instruments for IFR (attitude indicator, heading, VOR/ILS/GNSS navigation, two power sources etc.), approved for IFR/IMC.
- Flight plan — an IFR flight is filed as a flight plan (ICAO form) and requires an ATC clearance.
- Current data — navigation database (AIRAC), valid charts and NOTAMs (see NOTAM).
The clearance and CRAFT
Before an IFR flight, the crew receives a clearance from ATC. To write it down and read it back, the mnemonic CRAFT is handy: Clearance limit (where to), Route, Altitude (altitude/climb instructions), Frequency (the next frequency), Transponder (the squawk code). The clearance is a “contract" between the pilot and ATC — the pilot must read it back exactly and then comply with it. Deviations are allowed only with a new clearance or in an emergency.
Phases of an IFR flight
- Clearance and taxi — obtaining the clearance, setting the transponder, taxiing to the runway.
- SID (Standard Instrument Departure) — a published departure route that safely leads the aircraft from the airport onto the airway (see SID and STAR).
- En-route flight — along airways or direct routes (RNAV) at the assigned level.
- STAR (Standard Terminal Arrival Route) — a published arrival route leading to the approach.
- Approach — ILS, RNP/LPV, VOR etc., up to the decision to land/go around (see types of approach).
- Landing or a missed approach (see go-around).
Separation between aircraft
In controlled airspace, ATC provides separation between IFR flights so that they pass safely:
- Vertical: normally 1,000 ft; above FL410 (outside RVSM) 2,000 ft.
- RVSM (Reduced Vertical Separation Minima) — in the FL290–FL410 band, thanks to accurate altimeters, only 1,000 ft is kept even at high altitudes, which doubles the number of usable levels (the aircraft must be RVSM-approved).
- Horizontal (longitudinal/lateral): with radar typically 5 NM (in terminal areas even 3 NM); without radar, time/distance-based separation.
Thanks to this, aircraft in dense traffic never get dangerously close — and TCAS (see TCAS) is only the last safety net.
Levels and direction of flight
Above the transition level, IFR flights use flight levels (FL) assigned according to direction: in simplified terms, eastbound (track 000–179°) odd thousands of feet, westbound (180–359°) even — the so-called semicircular rule (for details and exceptions see Flight levels). The specific level is always assigned by ATC in the clearance.
Holding patterns
When it is not possible to continue straight away (traffic, weather, waiting for an approach), ATC sends the aircraft into a holding pattern — a standard oval (racetrack) around a fixed point, where the aircraft “circles". A standard hold has right turns and legs typically 1 minute long (1.5 min higher up). There are three entry methods (direct, parallel, teardrop) depending on the angle of arrival. Holding is a routine procedure that just causes delay — the pilot must be able to enter it and maintain it even in wind.
Alternate and fuel
An IFR flight is planned with reserves in case the destination is unavailable. The crew designates an alternate airport and loads fuel for: taxi + trip to the destination + contingency + diversion to the alternate + final reserve + possibly extra. Under EASA the final reserve is about 30 min (turbine) or 45 min (piston) — see fuel planning. The point is that the aircraft never runs out of fuel, even in the event of a delay or diversion.
Loss of communication (lost comms)
If the radio fails, there is a practised procedure. The crew sets the transponder to 7600 (loss of communication) and continues according to the rules: it flies according to the last clearance, or according to what it was told to expect, and finally according to the filed flight plan — and in line with the rules for the altitude and time to begin the approach. The aim is for ATC to be able to predict what the aircraft will do even without contact. (The emergency code is 7700, hijacking 7500.)
IMC, the scan and spatial disorientation
Flying in IMC places special demands on the pilot: without a view outside there is a risk of spatial disorientation (the senses “lie", and the pilot feels a bank that is not there). That is why the instrument scan is key — systematically moving the eyes across the instruments and trusting the instruments over one's own sensations. Unmanaged disorientation in IMC is a common cause of accidents among untrained pilots (which is why the IR is a demanding rating).
Czech Republic → Europe → World
The IFR rules are based on ICAO (Annex 2) and in Europe they are harmonised by SERA; ratings and operations are handled by EASA (Part-FCL, Part-CAT). In the Czech Republic IFR services are provided by ŘLP ČR, and the procedures and routes are in the Czech AIP (as of 06/2026). Worldwide the same ICAO framework applies with local deviations; the USA (FAA) has its own conventions (e.g. phraseology, some procedures), but the principle is the same. The rule: always study the AIP and procedures for the specific area.
In practice — X-Plane / MSFS
- Plan and “file" an IFR flight (SimBrief → FMS), get a clearance and fly the whole procedure: SID → en-route → STAR → approach.
- On VATSIM/IVAO, practise communication and reading back the clearance (CRAFT) — the best training for real-world practice.
- Practise the hold (entries, maintaining it in wind) and the instrument scan in IMC.
- Practise a loss of communication (7600) and the procedure according to the plan.
- Fly in IMC (clouds, fog) and trust the instruments — the sim is a safe place to train for disorientation.
In practice — DCS World
DCS does not model the civil IFR clearance system, but instrument flying exists: you fly in IMC and perform instrument approaches (ILS on the A-10C, TACAN/PAR talk-downs, CASE III ICLS on the carrier). The military equivalent of “IFR" is flying by instruments and being guided (GCI/AWACS, datalink). For practising civil IFR (clearances, SIDs/STARs, holds), however, a civil sim is more illustrative.
The approach in detail: IAF, FAF, MDA/DA
The final phase of an IFR flight has its own structure of fixes and altitudes. The approach usually begins at the IAF (Initial Approach Fix) and continues through intermediate segments to the FAF (Final Approach Fix), from where the final descent to the runway begins. The key is the minimum below which you must not descend without visual references: for non-precision approaches the MDA (Minimum Descent Altitude — you hold it until the missed approach point), for precision approaches the DA/DH (Decision Altitude/Height — where you decide to land or go around). If you do not see the runway at the minimum, you fly a missed approach along the published track from the MAP onwards to a hold or to the alternate. For the types of approach in detail see types of approach.
Handovers between units and vectoring
During an IFR flight you are gradually “handed over" between different ATC units: on the ground typically Delivery (clearance) → Ground (taxi) → Tower (takeoff/landing) → Departure/Approach → Center/Radar (en-route control). At each handover you retune to the new frequency and check in. ATC can also guide you with radar vectors — instead of the published route, it gives you specific headings (“fly heading 270, descend to…") and can guide you, for example, straight onto the final approach. Vectoring is common in dense terminal traffic and speeds up the flow of aircraft.
Continuous descent and efficient IFR
Modern IFR emphasises the continuous descent (CDA/CDO, Continuous Descent Approach/Operation): instead of descending “in steps" (with repeated additions of thrust), the aircraft descends on one smooth profile from the top of descent (T/D) to the approach. This saves fuel and reduces noise and crew workload. It is made possible by good planning (FMS, see FMS) and cooperation with ATC. It is an example of how IFR is developing towards greater efficiency and environmental friendliness.
History and origins of IFR
The rules for instrument flight were born in the 1920s–30s, when the first instruments (the attitude indicator, the turn indicator) made it possible to fly “blind". A famous milestone is the flight by Jimmy Doolittle (1929), who was the first to take off, fly a circuit and land solely by reference to instruments under a hooded cockpit. From these beginnings a sophisticated system of routes, procedures and control developed, which today makes safe air transport possible in almost any weather. IFR thus turned the aeroplane from a “fair-weather vehicle" into a reliable means of transport.
Common mistakes
- Descending below the MDA/DA without visual references — a hard limit, not a recommendation; otherwise CFIT is a risk.
- An inaccurate readback of the clearance — always repeat it exactly (CRAFT) and check if in doubt.
- Trusting sensations instead of instruments in IMC — leads to spatial disorientation.
- A bad hold entry or not maintaining the pattern in wind.
- Underestimating fuel for the alternate and delays (holding).
Safety and limitations
- Spatial disorientation in IMC — trust the instruments, not your sensations; keep up the scan.
- CFIT (controlled flight into terrain) — observe the minimum altitudes and procedures; GPWS/TAWS helps (see GPWS).
- Currency and training — IR skills are lost quickly; train regularly.
- Complying with the clearance — do not deviate without a new clearance (except in an emergency).
- A backup in case of GNSS loss — be able to navigate by VOR/ILS too (see GPS).
FAQ
When must I fly IFR? In IMC (below the VMC minima) and generally in airspace/operations where the rules require it; airliners always fly IFR.
What is a clearance? Permission from ATC (where to, which way, how high, frequency, code) — a “contract" that you must comply with exactly.
What is RVSM? A reduced vertical separation of 1,000 ft in the FL290–FL410 band, thanks to accurate altimeters.
What should I do if I lose communication? Squawk 7600 and fly according to the last clearance / the expected clearance / the filed plan.
What is a hold? A holding oval around a fix, where the aircraft circles until it is cleared to continue.
Do I need a special rating for IFR? Yes — an instrument rating (IR) and an aircraft equipped for IFR.
What is the difference between the MDA and the DA? The MDA (non-precision approaches) is held until the missed approach point; the DA (precision) is the altitude at which you decide to land or go around.
What is radar vectoring? Instead of the published route, ATC gives you specific headings and descents and guides you directly, typically onto the final approach.
What is a CDA? A continuous descent on one profile (instead of “in steps") — it saves fuel and reduces noise and crew workload.
Is there IFR in DCS? Not the civil system, but instrument approaches and flight in IMC, yes (ILS, TACAN, CASE III).
Related links
- Airspace classes · SID and STAR · Types of approach · Flight levels
- Radiotelephony · ILS · Fuel planning · Glossary — IMC, VMC, IR, SID, STAR, RVSM, holding, clearance, 7600
Sources (verified 06/2026): ICAO Annex 2 (Rules of the Air) and Annex 6, SERA (EASA), EASA Part-FCL (IR) and Part-CAT (fuel CAT.OP.MPA.150), FAA AIM (IFR procedures); the SID/STAR/approach phases of flight, separation of 1,000/2,000 ft + RVSM FL290–410 + 5/3 NM, CRAFT, holding, lost comms 7600 and the fuel reserves verified from multiple sources. For specific procedures in the Czech Republic, see the current Czech AIP.