Contents
Types of approach
The approach is the final and most demanding phase of flight — the transition from en-route flight to a safe touchdown on the runway. For this manoeuvre to be safe in all weather, it is standardised: there are fixed types of approach, segments, fixes and minimum altitudes below which the pilot may not descend without visual contact with the runway. The type of approach determines how precise the guidance the aircraft receives is and how low it may continue. Understanding the types of approach is essential for IFR flying (see IFR) and is among the most interesting things you can fly in the sim — from an ILS at a big airport to a night carrier landing in DCS.
How approaches are classified
ICAO (Doc 8168) distinguishes approaches by the guidance they provide:
- NPA — non-precision approach (2D): lateral guidance only (course), no vertical guidance. The pilot descends to the MDA (minimum descent altitude). This includes VOR, NDB, LOC and LNAV.
- APV — approach with vertical guidance (3D): lateral and vertical guidance, but it does not meet the strictest standards of a precision approach. This includes LNAV/VNAV and LPV (via SBAS). You descend to a DA.
- PA — precision approach (3D): precise lateral and vertical guidance to the standard. This includes ILS, GLS (GBAS), PAR and (historically) MLS. It allows the lowest minima (CAT I/II/III) and descent to a DA/DH.
Simply put: 2D = direction only, 3D = direction and slope. The more precise the guidance, the lower the aircraft may descend before it must see the runway.
Structure of an approach
Every approach has fixed segments and fixes:
- IAF (Initial Approach Fix) — the fix where the approach begins.
- IF (Intermediate Fix) — the intermediate fix, lining up for the final.
- FAF/FAP (Final Approach Fix/Point) — from here the final descent to the runway begins.
- MAP (Missed Approach Point) — the latest point at which the decision is made: land, or fly a missed approach.
Associated with the fixes are altitudes (e.g. over the FAF) and the published missed approach procedure, along which the aircraft climbs away when it cannot see the runway.
Minima: DA, MDA, RVR
Key are the minimum altitudes and visibility:
- DA/DH (Decision Altitude/Height) — for precision and APV approaches; at the DA you decide: if you have the runway in sight, you land, otherwise go-around. You may briefly “sink" below it while making the decision.
- MDA/MDH (Minimum Descent Altitude/Height) — for non-precision approaches; you must not descend below this altitude until you see the runway (you hold it until the MAP).
- RVR / visibility — the runway visual range required for the given type and category (see ILS categories I/II/III).
The minima are on the approach chart and are a hard limit — breaching them is a common cause of CFIT accidents (see Air accidents).
Types by navigation aid
- ILS — precision, the most widespread; LOC + glideslope, minima down to CAT III (see ILS).
- RNP APCH / LPV — satellite-based; LPV (APV) comes close to ILS CAT I without a beacon (see RNAV/RNP).
- VOR / NDB / LOC — non-precision, lateral guidance only; descent to the MDA.
- GLS (GBAS) — a precision approach via ground-based augmentation of GPS; a modern alternative to ILS.
- PAR / GCA — precision approach radar: the controller watches the aircraft on radar and talks the pilot down by voice (“on glidepath, on centreline"); typically military.
- SRA — surveillance radar, coarser guidance (non-precision).
- Visual approach — the pilot sees the runway and navigates to it themselves (with ATC clearance).
- Circling — an approach to one runway finished with a visual manoeuvre to another.
Visual aids at the runway
The end of the approach is also supported by lighting systems: approach lights (ALS), threshold and runway lights and above all the PAPI/VASI — a light indicator of the glide path (“two white, two red = on profile"). These aids help the pilot finish the approach visually, even on non-precision types and at night.
Stabilised approach and CDFA
Regardless of the type, the stabilised approach rule applies: by a given height (typically 1,000 ft IMC / 500 ft VMC) the aircraft must be on the centreline, on the glide path, at the right speed and in the landing configuration — otherwise go-around. For non-precision approaches, CDFA (Continuous Descent Final Approach) is now standard practice — instead of descending “in steps" to the MDA, you descend continuously on one slope, which is safer and quieter.
Missed approach
If you cannot see the runway at the DA/MDA (or the approach is not stable), you fly a missed approach (go-around): add thrust, climb and fly the published missed approach procedure to a hold or for another attempt/to the alternate. It is not a mistake but a standard safe procedure (in detail see Go-around).
Czech Republic → Europe → World
The classification and procedures are defined by ICAO (Doc 8168, PANS-OPS); Europe operates them under EASA, and in the Czech Republic the approaches are published in the Czech AIP (as of 06/2026) — major airports have ILS (LKPR up to CAT III), smaller ones increasingly RNP/LPV. Worldwide the same framework applies; the USA uses both PANS-OPS and its own TERPS criteria and has very widespread LPV (via WAAS). Always use the specific charts and minima from the current AIP.
In practice — X-Plane / MSFS
- Select an approach to the destination runway in the FMS and fly all of it from the IAF via the FAF to the MAP.
- Compare a precision approach (ILS, continuous descent to the DA) with a non-precision one (VOR, steps to the MDA, or CDFA).
- Fly an LPV (RNP) and you will see “ILS-like" guidance without a beacon.
- Practise stabilisation and the decision at minima (land vs. go-around).
- Use the PAPI for the visual finish and for night approaches.
In practice — DCS World
DCS excels in instrument and especially carrier approaches. To airfields you fly ILS (A-10C), TACAN and PAR/GCA (the controller talks you down by voice). The most interesting are carrier approaches according to the CASE system:
- CASE I — good weather (ceiling ≥ 3,000 ft, visibility ≥ 5 NM), a visual approach with an “overhead break" pattern.
- CASE II — intermediate weather (ceiling ≥ 1,000 ft, visibility ≥ 5 NM); controlled guidance (marshal/TACAN) followed by a visual finish.
- CASE III — night or bad weather (ceiling < 1,000 ft or visibility < 5 NM); a fully instrument approach from the “marshal" stack via ICLS (the carrier's ILS, channel-based), ACLS (automatic guidance) and the optical IFLOLS (“meatball").
The optical glide slope indicator (lens/meatball) and the LSO's guidance help with the touchdown. It is great precision training — and a clear demonstration that the “direction + slope + minima" principle applies at sea too.
Approach preparation (briefing)
A professional approach begins long before the FAF — with a briefing. The crew goes through the approach chart out loud: the type and name of the approach, the frequency/course, the glide path angle, the altitudes over the fixes, the minima (DA/MDA, RVR), the missed approach track and altitude, taxiing after landing and any peculiarities (terrain, lights, wind). The aim: for both pilots to have the same plan and know what will happen and exactly when to go around. A good briefing is the best prevention of errors in the most demanding phase of flight (related to CRM).
How an approach unfolds step by step
A typical approach begins when ATC “hands you over" to the approach unit and clears the approach. From the en-route phase you descend along the arrival route (STAR) and line up at the IAF. From there you fly the intermediate segment to the FAF, where you complete the landing configuration (flaps, gear) and begin the final descent along the glide path or profile. Throughout, you check the altitudes over the individual fixes, the speed and stabilisation. At the minimum altitude (DA/MDA) comes the decision: if you see the runway and are stable, you complete the landing; otherwise go-around. The whole procedure is prepared in advance (“briefed") — the crew goes through the approach and divides the roles before it starts.
Vectoring and lining up on final
Often you are not guided onto the final by the published route but by radar vectors: ATC gives you headings and descents so as to “put" you on the approach centreline before the FAF. Then it says “cleared approach" and hands you over to the tower. In dense traffic this is faster than flying the whole STAR — but it requires attention to capture the approach at the right altitude and distance and to stabilise in time.
Visual illusions on approach
The end of the approach is prone to visual illusions that tempt you onto the wrong profile:
- “Black hole" — an approach at night over dark terrain (water, unlit countryside) creates the impression that you are higher than you are; the pilot then descends too low.
- Runway width — a narrow runway looks “further/higher", a wide one “closer/lower", which leads to the wrong flare height.
- Sloping terrain / runway — rising surroundings or an upsloping runway mislead you about the descent angle.
- Rain on the windscreen — refracts light and distorts distance.
Defence: trust the instruments and the glide path guidance (ILS, PAPI, VNAV), not just the “feeling from the window".
Weather and choice of approach
Which approach you use depends mainly on the weather. In good visibility a visual or non-precision approach is enough; with a low cloud base and fog a precision approach (ILS CAT II/III) is needed, which allows you to descend the lowest. The crew therefore assesses the METAR/TAF and RVR before arrival (see METAR) and chooses an approach with suitable minima — and always has a plan B in reserve (another runway, another approach, an alternate).
History of approaches
The first “instrument" approaches appeared in the 1930s–40s with the development of radio navigation and ILS. Gradually more precise systems were added, automatic landing (CAT III), and in recent decades satellite approaches (RNP/LPV), which brought precise guidance even where there used to be only a “non-precision" beacon. The trend is for every runway to have an approach with vertical guidance — it is safer than a stepdown descent.
Common mistakes
- Late stabilisation — not achieving the configuration and speed by the given height → go-around.
- Descending below minima without visual contact — forbidden.
- Succumbing to an illusion (black hole, runway width) instead of trusting the guidance.
- Misidentifying the runway/approach — always verify the frequency/course and the chart.
- A botched transition from vectors to the final (capturing too high/fast).
Safety and limitations
- Minima are hard limits — below the DA/MDA without visual contact you must not continue; otherwise CFIT is a risk.
- Stabilisation — an unstable approach = go-around, not “forcing it".
- The right type and chart — fly only approaches you are equipped for; have the current IAP and NOTAMs (see NOTAM).
- Illusions — night approaches, wet runways or sloping terrain deceive; trust the instruments and the PAPI.
- Backup — be able to fly a non-precision approach too, in case the ILS/GNSS fails.
FAQ
What is the difference between a precision and a non-precision approach? A precision approach (ILS/GLS/PAR) has vertical guidance and a DA; a non-precision one (VOR/NDB/LOC) only direction and an MDA.
What is an APV? An approach with vertical guidance (LNAV/VNAV, LPV) — 3D, but it does not meet the precision standard; you descend to a DA.
What is the MAP? Missed Approach Point — the point where you decide to land/go around.
What is CDFA? A continuous descent on a non-precision approach instead of “stepping down" — safer and quieter.
What is PAR/GCA? Precision approach radar — the controller talks you down by voice using the radar (military).
What are CASE I/II/III? Carrier approach modes depending on weather/time of day — from visual (I) to fully instrument (III).
What is a PAPI? A light indicator of the glide path (“two white, two red = on profile").
What is the “black hole" illusion? A night approach over darkness gives the impression that you are higher — it tempts you to descend too low; trust the guidance and the PAPI.
What are vectors to final? ATC gives you headings and descents so as to put you on the approach centreline before the FAF.
What is an approach briefing? Going through the chart together (type, minima, missed approach) before starting, so that both pilots have the same plan and know exactly when to go around.
Related links
- ILS · RNAV/RNP and LPV · IFR · Go-around
- SID and STAR · Aeronautical charts · LKPR · Glossary — IAF, FAF, MAP, DA, MDA, NPA, APV, PA, PAR, CDFA, CASE, ICLS
Sources (verified 06/2026): ICAO Doc 8168 (PANS-OPS) and Annexes 6/10, EASA (approaches and minima), Czech AIP; for carrier approaches NATOPS / Eagle Dynamics documentation (DCS — CASE I/II/III, ICLS/ACLS, IFLOLS). The NPA/APV/PA classification, IAF/IF/FAF/MAP segments, DA/MDA minima, CDFA and the CASE criteria verified from multiple sources. For specific procedures/minima, see the current Czech AIP.