Lesson 12: VOR navigation

Simulator: Lekce 12: Navigace VOR

Navigating with the VOR

How a VOR works

A VOR transmits 360 radials (magnetic bearings). The pilot selects the frequency and the desired radial. The CDI (Course Deviation Indicator) shows the deviation.

Setting up the VOR

  1. Tune the frequency on the NAV radio (e.g. OKL — take the current frequency from the chart)
  2. Verify the identifier (Morse code)
  3. Turn the OBS to the desired course
  4. The CDI shows the deviation (1 dot = 2°)
  5. TO/FROM flag — you are flying TO/FROM the station

Tracking a radial

  • CDI to the right → fly right (TO flag, heading roughly along the selected course)
  • CDI to the left → fly left
  • Intercept heading: desired track ± 10–30°

VOR/DME fix

The intersection of two VOR radials = an exact position. Or a VOR radial + DME distance.

Exercise

After departing LKPR, set the OBS to a course towards the south-east (e.g. 140° FROM OKL), intercept and track it outbound, and at DME 20 note your position on the chart and continue towards LKTB. Then try tracking a radial inbound TO the station.